BMW R1200GS
- ECU
- BMS-K (Bosch ME9)
- ECU maker
- Bosch
- Model years
- 2004-2012
- Stock firmware
- Included · 2.5 MB
What you can tune
32 calibration tables · 0 scalars · 1 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| RPM#2 - Fuel - 24pti | Fuel | 1 |
| RPM#5 - LAMBDA - 12pti | Fuel | 1 |
| Injection Base-Lambda - 16*16 | Fuel | 1 |
| Request AFR - 12*16 | Fuel | 1 |
| Lambda For Component Protection - 12*16 | Fuel | 1 |
| RPM#1 - IGN - 24pti | Ignition | 1 |
| Ignition full load #1 - 24*3 | Ignition | 1 |
| Ignition full load #2 | Ignition | 2 |
| Ignition low load #1 | Ignition | 1 |
| Optimal Ignition Advance - 16*16 | Ignition | 1 |
| Partial Throttle Ignition Advance#1 - 24*16 | Ignition | 1 |
| Partial Throttle Ignition Advance#2 | Ignition | 1 |
| TPS - 24pti | Throttle / ETV | 1 |
| TPS 16 pti | Throttle / ETV | 1 |
| Throttle Valve - 16*6 | Throttle / ETV | 1 |
| Airflow Throttle- 24*24 | Throttle / ETV | 1 |
| Optimal Engine Torque - 16*16 | Torque | 1 |
| Optimal Engine Torque #2 - 16*16 | Torque | 1 |
| REV Limiter # | Limiters | 2 |
| Speed limiter | Limiters | 1 |
| RPM#3 - 16pti | Sensors & Axis | 1 |
| AIR## - #pti | Sensors & Axis | 2 |
| RPM - 8pti | Sensors & Axis | 1 |
| Nm#1 - 16pti | Sensors & Axis | 1 |
| O# Sensor## | Sensors & Axis | 2 |
| Hardware | Other · ROM Info | 1 |
| Software | Other · ROM Info | 1 |
| Load engine (AIR%) - 16*16 | Other · Air Control | 1 |
1 patch & flag (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the BMW R1200GS 2004-2012?
This verified definition exposes 32 calibration tables — including fuel, ignition, throttle, limiters, other · air control, other · rom info, sensors & axis and torque maps — plus 0 adjustable scalars and 1 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this BMW R1200GS definition cover?
The BMS-K (Bosch ME9) (Bosch). Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.