BMW R1200R-RT
- ECU
- BMS-K (Bosch ME9)
- ECU maker
- Bosch
- Model years
- 2005-2013
- Stock firmware
- Included · 2.5 MB
What you can tune
40 calibration tables · 0 scalars · 3 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Lambda engine during afterstart | Fuel | 1 |
| Real mass flow over throttle valve | Fuel | 1 |
| Map for calculation of nominal charge | Fuel | 1 |
| Lambda map at partial load | Fuel | 1 |
| Delta Lambda target factor for component protection | Fuel | 1 |
| Lambda target for component protection | Fuel | 1 |
| Lambda driver's request map | Fuel | 1 |
| Lambda request full load # | Fuel | 2 |
| Fuel enrichment by air charge and gear | Fuel | 1 |
| Fuel enrichment by RPM and gear | Fuel | 1 |
| Fuel cut off | Fuel | 1 |
| Optimal ignition angle for component protection | Ignition | 1 |
| Knock detection factor characteristic map # | Ignition | 6 |
| Ignition angle map in idle # | Ignition | 2 |
| Ignition angle map partial load # | Ignition | 2 |
| Ignition angle map full load # | Ignition | 2 |
| Map with permanently latest possible ignition angle | Ignition | 1 |
| Minimum ignition angle for start and restart # | Ignition | 2 |
| Accelerator Map | Throttle / ETV | 1 |
| Throttle valve characteristic depends on from accelerator only for application | Throttle / ETV | 1 |
| Throttle valve angle threshold for full load detection | Throttle / ETV | 1 |
| Optimal engine torque | Torque | 1 |
| Exhaust gas temperature map # | Air & Exhaust | 4 |
| Idle engine speed | Idle | 1 |
| RPM Limiter | Limiters | 1 |
| Speed Limiter | Limiters | 1 |
| Info | Other | 1 |
3 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the BMW R1200R-RT 2005-2013?
This verified definition exposes 40 calibration tables — including fuel, ignition, throttle, air & exhaust, limiters, idle and torque maps — plus 0 adjustable scalars and 3 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this BMW R1200R-RT definition cover?
The BMS-K (Bosch ME9) (Bosch). Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.