Ducati ST4S
- ECU
- Marelli IAW 59M
- ECU maker
- Marelli
- Model years
- 2001-2005
- Stock firmware
- Upload your own
What you can tune
23 calibration tables · 0 scalars · 1 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Fuel Main | Fuel | 1 |
| Fuel Delta (Rear cylinder) | Fuel | 1 |
| Fuel Engine Temp Correction | Fuel | 1 |
| Fuel warm-up trim | Fuel | 1 |
| Fuel: Atm Pressure-Air Temp Correction | Fuel | 1 |
| Fuel Phase | Fuel | 1 |
| Lambda | Fuel | 1 |
| Ignition Main Advance | Ignition | 1 |
| Ignition Air temp correction | Ignition | 1 |
| Ignition Engine temp Correction | Ignition | 1 |
| TPS legend | Throttle / ETV | 1 |
| Idle rpm | Idle | 1 |
| Oil Temp legend | Temperature | 1 |
| Engine Temp legend | Temperature | 1 |
| Air Temp legend | Temperature | 1 |
| Warm up time Legend | Temperature | 1 |
| Rev Limit | Limiters | 1 |
| Battery legend | Other · ST4s 59M HW010 Non-functional (backport) | 1 |
| Software | Other · ST4s 59M HW010 Non-functional (backport) | 1 |
| Hardware | Other · ST4s 59M HW010 Non-functional (backport) | 1 |
| Airpressure legend Mbar | Other · ST4s 59M HW010 Read only | 2 |
| RPM legend | Other · ST4s 59M HW010 Read only | 1 |
1 patch & flag (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Ducati ST4S 2001-2005?
This verified definition exposes 23 calibration tables — including fuel, ignition, throttle, limiters, idle, other · st4s 59m hw010 non-functional (backport), other · st4s 59m hw010 read only and temperature maps — plus 0 adjustable scalars and 1 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Ducati ST4S definition cover?
The Marelli IAW 59M (Marelli). Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.