Suzuki GSXR-1000
- ECU
- 32920-21H80
- ECU maker
- —
- Model years
- 2008
- Stock firmware
- Included · 1 MB
What you can tune
243 calibration tables · 0 scalars · 27 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Decel Fuel Cut RPM | Fuel | 1 |
| FuelTPS Cyl# MS# Gear#-# | Fuel | 24 |
| FuelTPS Cyl# MS# GearN | Fuel | 23 |
| FuelMAP Cyl# MS# Gear#-# | Fuel | 24 |
| FuelMAP Cyl# MS# GearN | Fuel | 23 |
| Secondary Inj% - Gear # | Fuel | 6 |
| IGN Gear-Group# | Ignition | 1 |
| Ign Cyl#/# Group## MS# | Ignition | 10 |
| Ign Cyl# Group## MS# | Ignition | 75 |
| Speed vs Duty % | Ignition | 1 |
| STP Gear# MS# | Throttle / ETV | 36 |
| STP GearN MS# | Throttle / ETV | 6 |
| Launch RPM | Limiters | 1 |
| Launch Delay | Limiters | 1 |
| Maximum Ramp RPM | Limiters | 1 |
| Hold Time | Limiters | 1 |
| Ramp Time | Limiters | 1 |
| Pit Speed Limiter RPM | Limiters | 1 |
| Gear # => # | Gearbox | 5 |
| Gear Unknown | Gearbox | 1 |
| Next Shift Delay | Quickshifter | 1 |
27 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSXR-1000 2008?
This verified definition exposes 243 calibration tables — including fuel, ignition, throttle, limiters, gearbox and quickshifter maps — plus 0 adjustable scalars and 27 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSXR-1000 definition cover?
The 32920-21H80. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.