Suzuki GSXR-1000
- ECU
- 32920-18G10
- ECU maker
- —
- Model years
- 2003-2004
- Stock firmware
- Included · 256 KB
What you can tune
97 calibration tables · 0 scalars · 4 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| RPM_Fuel_Soft/Hard | Fuel | 1 |
| RPM_Fuel_RevLimit_Gear_Soft_Cut | Fuel | 1 |
| RPM_Fuel_RevLimit_Gear_Hard_Cut | Fuel | 1 |
| RPM_Fuel_Hard | Fuel | 1 |
| RPM_Fuel_Hard_Neutral | Fuel | 1 |
| Cyl_# | Fuel | 16 |
| Injetction Timing Primary | Fuel | 1 |
| Fuel Cut | Fuel | 1 |
| Fuel cut RPM | Fuel | 1 |
| Cyl # | Fuel | 16 |
| Ignition_Map_Gear_Select | Ignition | 1 |
| Cyl_1,4_Neutrall | Ignition | 1 |
| Cyl_#,#_Neutral | Ignition | 2 |
| Cyl_#_Group_# | Ignition | 16 |
| Cyl_2,3_Neutra | Ignition | 1 |
| Gear_N | Throttle / ETV | 2 |
| Gear_# | Throttle / ETV | 8 |
| Gear_5-6 | Throttle / ETV | 2 |
| TPS | Throttle / ETV | 1 |
| Neutral | Air & Exhaust | 2 |
| Gear_#-# | Air & Exhaust | 4 |
| Fan Control Temperature | Temperature | 1 |
| RPM_RevLimit_Gear_Soft | Limiters | 1 |
| Comp # Gear | Gearbox | 6 |
| IAP Error Voltage | Sensors & Axis | 1 |
| IAP | Sensors & Axis | 1 |
| Comp High Load #M | Other · Ram Air | 4 |
| Type | Other · Setup | 1 |
| Injetor volts Comp | Other · Setup | 1 |
| RPM | Other · Setup | 1 |
4 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSXR-1000 2003-2004?
This verified definition exposes 97 calibration tables — including fuel, ignition, throttle, air & exhaust, limiters, gearbox, other · ram air, other · setup, sensors & axis and temperature maps — plus 0 adjustable scalars and 4 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSXR-1000 definition cover?
The 32920-18G10. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.