Suzuki GSXR-1000
- ECU
- 32920-41G80
- ECU maker
- —
- Model years
- 2005-2006
- Stock firmware
- Included · 256 KB
What you can tune
85 calibration tables · 3 scalars · 7 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Cyl # ms# | Fuel | 32 |
| Gear # | Fuel | 6 |
| Primary | Fuel | 1 |
| Secondary | Fuel | 1 |
| Secondary INJ% | Fuel | 1 |
| Fuel RevLimit Gear Soft | Fuel | 1 |
| Fuel RevLimit Gear Hard | Fuel | 1 |
| Fuel RevLimit Hard | Fuel | 1 |
| Fuel RevLimit Hard Neutral | Fuel | 1 |
| Decel Fuel Cut | Fuel | 1 |
| Gear-> Group# | Ignition | 1 |
| Cyl #/# GearN ms# | Ignition | 4 |
| Cyl # Group# ms# | Ignition | 24 |
| Ignition RevLimit Gear Soft | Ignition | 1 |
| Volt-> Dwell | Ignition | 1 |
| GearN ms# | Throttle / ETV | 2 |
| Gear#-# ms# | Throttle / ETV | 4 |
| Fan Temps | Temperature | 1 |
| Quick Shift Timimg Map GEAR | Gearbox | 1 |
3 adjustable scalars (rev limits, thresholds, corrections)
| QS Minium RPM |
| QS Active delay |
| QS Next shift delay |
7 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSXR-1000 2005-2006?
This verified definition exposes 85 calibration tables — including fuel, ignition, throttle, gearbox and temperature maps — plus 3 adjustable scalars and 7 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSXR-1000 definition cover?
The 32920-41G80. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.