Yamaha YZF-R6
- ECU
- BN6-8591A-12
- ECU maker
- —
- Model years
- 2017-2023
- Stock firmware
- Included · 1 MB
What you can tune
691 calibration tables · 0 scalars · 7 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| ETC vs RPM Idle Speed | Fuel | 1 |
| Primary Injector | Fuel | 1 |
| Secondary Injector | Fuel | 1 |
| Cyl # | Fuel | 8 |
| Fuel Map Balance | Fuel | 1 |
| Gear 0 | Fuel | 1 |
| Gear #-# | Fuel | 2 |
| Secondary Injector Balance | Fuel | 1 |
| Decel Fuel Cut Gear RPM | Fuel | 1 |
| Map# Select Power Mode # | Ignition | 4 |
| Map# # | Ignition | 10 |
| Offsets Cyl # | Ignition | 3 |
| Volt Dwell | Ignition | 1 |
| RPM vs TPS - IGN Retard(deg) | Ignition | 2 |
| IGN RampIn Increment(deg) | Ignition | 2 |
| IGN RampOut Increment(deg) | Ignition | 2 |
| Map# # | Throttle / ETV | 56 |
| ETV - Power Mode Select Map# | Throttle / ETV | 1 |
| Auto-Blipper TPS | Throttle / ETV | 1 |
| RPM vs TPS - Hold Time (ms) | Throttle / ETV | 2 |
| Rev Limit # | Limiters | 3 |
| Gear N | Gearbox | 1 |
| Gear # | Gearbox | 6 |
| Minimum RPM | Quickshifter | 1 |
| Maximum APS | Quickshifter | 1 |
| Inhibit Delay | Quickshifter | 1 |
| Activation Delay | Quickshifter | 1 |
| GP Sensor Limits | Quickshifter | 1 |
| Auto-Blipper Duration | Quickshifter | 1 |
| #x#D#FA #x# Bit# | Other · 2D | 2 |
| #x#A#F# #x# Bit# | Other · 2D | 6 |
| 0x000A4FC9 1x29 Bit8 | Other · 2D | 1 |
| 0x000A4FFA 1x10 Bit8 | Other · 2D | 1 |
| #x#A# #x# Bit# | Other · 2D | 14 |
| #x#A#C #x# Bit# | Other · 2D | 5 |
| #x#A#A #x# Bit# | Other · 2D | 4 |
| 0x000A50BE 1x20 Bit16 | Other · 2D | 1 |
| #x#A#FA #x# Bit# | Other · 2D | 2 |
| #x#A#A# #x# Bit# | Other · 2D | 4 |
| #x#A#D# #x# Bit# | Other · 2D | 6 |
278 map groups in total — the full list is in the editor.
7 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha YZF-R6 2017-2023?
This verified definition exposes 691 calibration tables — including fuel, ignition, throttle, limiters, gearbox, quickshifter, other · 2d, other · 3d, other · qss mapping mode 1, other · qss mapping mode 2 and other · settings maps — plus 0 adjustable scalars and 7 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha YZF-R6 definition cover?
The BN6-8591A-12. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.