Yamaha YZF-R6
- ECU
- 2C0-8591A-XX
- ECU maker
- —
- Model years
- 2006-2007
- Stock firmware
- Upload your own
What you can tune
47 calibration tables · 0 scalars · 10 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Cyl - # | Fuel | 8 |
| DeltaTPS vs RPM - Gear 2 3 4 | Fuel | 1 |
| DeltaTPS vs RPM - Gear 0 1 5 6 | Fuel | 1 |
| Primary INJ Adv. | Fuel | 1 |
| Secondary Inj. % | Fuel | 1 |
| Revlimit Fuel Soft/Hard | Fuel | 1 |
| Decel Fuel Cut RPM | Fuel | 1 |
| Gear N | Ignition | 1 |
| Gear 1 2 3 | Ignition | 1 |
| Gear 4 | Ignition | 1 |
| Gear 5 6 | Ignition | 1 |
| Volt-Dwell | Ignition | 1 |
| RevLimit IGN. | Ignition | 1 |
| RevLimit IGN. Neutral | Ignition | 1 |
| TPS Opening % | Throttle / ETV | 1 |
| Clutch-In | Air & Exhaust | 1 |
| Gear N | Air & Exhaust | 1 |
| In-Gear | Air & Exhaust | 1 |
| ECT vs RPM Idle speed | Idle | 1 |
| SAP pressure comp | Idle | 1 |
| Max Cooland Temp | Temperature | 1 |
| Strength | Temperature | 1 |
| Max RPM | Temperature | 1 |
| Open time | Temperature | 1 |
| Close time | Temperature | 1 |
| Fan Temps | Temperature | 1 |
| Pit Speed RPM | Limiters | 1 |
| Launch Control Delay ms | Limiters | 1 |
| Launch RPM | Limiters | 1 |
| Rerelase Speed | Limiters | 1 |
| Shift Kill Gear # > # | Gearbox | 5 |
| Delay Between Shift ms | Quickshifter | 1 |
| Minimum Activation RPM | Quickshifter | 2 |
| Target RPM | Quickshifter | 1 |
| Delay Between Autoblips (ms) | Quickshifter | 1 |
10 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha YZF-R6 2006-2007?
This verified definition exposes 47 calibration tables — including fuel, ignition, throttle, air & exhaust, limiters, gearbox, quickshifter, idle and temperature maps — plus 0 adjustable scalars and 10 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha YZF-R6 definition cover?
The 2C0-8591A-XX. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.