Yamaha YZF-R6
- ECU
- BN6-8591A-10
- ECU maker
- —
- Model years
- 2017-2023
- Stock firmware
- Included · 1 MB
What you can tune
133 calibration tables · 0 scalars · 13 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Primary Injector Timing | Fuel | 1 |
| Secondary Injector Timing | Fuel | 1 |
| Cyl # | Fuel | 8 |
| Fuel Map Balance IAP-TPS | Fuel | 1 |
| Gear 0 | Fuel | 1 |
| Gear #-# | Fuel | 2 |
| Secondary Injector Balance | Fuel | 1 |
| Fuel Soft/Hard RPM Limit | Fuel | 1 |
| Deceleration Fuel Cut | Fuel | 1 |
| Map# # | Ignition | 10 |
| Offsets Cyl # | Ignition | 3 |
| Ignition Idle Temperature Compensation | Ignition | 1 |
| Ignition Coil Charge | Ignition | 1 |
| Ignition RPM Limit | Ignition | 1 |
| Ignition RPM Limiter #2 | Ignition | 1 |
| YCCI Opening RPM | Ignition | 1 |
| Fan Temps | Ignition | 1 |
| Map Selector - STD Mode | Ignition | 1 |
| Map Selector - A Mode | Ignition | 1 |
| Map Selector - B Mode | Ignition | 1 |
| Map Selector | Throttle / ETV | 1 |
| STD ## | Throttle / ETV | 28 |
| A ## | Throttle / ETV | 28 |
| B ## | Throttle / ETV | 28 |
| Gear N | Gearbox | 1 |
| Gear # | Gearbox | 6 |
| Checksum | Other · ROM Info | 1 |
| SW Version | Other · ROM Info | 1 |
13 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha YZF-R6 2017-2023?
This verified definition exposes 133 calibration tables — including fuel, ignition, throttle, gearbox and other · rom info maps — plus 0 adjustable scalars and 13 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha YZF-R6 definition cover?
The BN6-8591A-10. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.