Yamaha MT-01
- ECU
- 5YU-8591A-00
- ECU maker
- —
- Model years
- 2005-2012
- Stock firmware
- Upload your own
What you can tune
41 calibration tables · 1 scalars · 0 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Fuel :: Group # : Cyl # | Fuel | 6 |
| IGN-Group # :: Gear N : Cyl # | Ignition | 4 |
| IGN-Group # :: Gear # : Cyl # | Ignition | 20 |
| Table-TPS : 30 | Throttle / ETV | 1 |
| Table-TPS : # | # | Throttle / ETV | 2 |
| Rev Limiter | Limiters | 1 |
| Table-RPM : # | # | Sensors & Axis | 2 |
| Table-RPM : 19 | Sensors & Axis | 1 |
| ECU Brand | Other · Yamaha MT-01 2005 5YU-8591A-00 ECU Info | 1 |
| DD/MM/YY | Other · Yamaha MT-01 2005 5YU-8591A-00 ECU Info | 1 |
| SW Version | Other · Yamaha MT-01 2005 5YU-8591A-00 ECU Info | 1 |
| HW Version | Other · Yamaha MT-01 2005 5YU-8591A-00 ECU Info | 1 |
1 adjustable scalar (rev limits, thresholds, corrections)
| Info |
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha MT-01 2005-2012?
This verified definition exposes 41 calibration tables — including fuel, ignition, throttle, limiters, other · yamaha mt-01 2005 5yu-8591a-00 ecu info and sensors & axis maps — plus 1 adjustable scalars and 0 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha MT-01 definition cover?
The 5YU-8591A-00. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.