Suzuki GSF-650
- ECU
- 32920-17H90
- ECU maker
- —
- Model years
- 2007-2013
- Stock firmware
- Included · 256 KB
What you can tune
73 calibration tables · 1 scalars · 1 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Fuel Limit soft/hard *** | Fuel | 1 |
| Fuel Limit hard *** | Fuel | 1 |
| Fuel Limit Temp < 80º | Fuel | 1 |
| Fuel RPM Limit Neutral | Fuel | 1 |
| Fuel Limit soft/hard by gear *** | Fuel | 1 |
| Fuel Limit hard by gear *** | Fuel | 1 |
| Injector 1 to 4 volts Correction | Fuel | 1 |
| Acceleration Enrichment | Fuel | 1 |
| Primary injectors injection time | Fuel | 1 |
| AFR TARGET | Fuel | 1 |
| Fuel Cyl # IAP Gear #, # MS# | Fuel | 8 |
| Fuel Cyl # TPS Gear #, # MS# | Fuel | 8 |
| Ignition Limit Clutch ON? | Ignition | 1 |
| Ignition Map Select | Ignition | 1 |
| Ignition Cyl #.# Neutral MS# | Ignition | 4 |
| Ignition Cyl # Group # MS# | Ignition | 16 |
| IGN Advance IDLE x ECT CYL #-# | Ignition | 2 |
| STV Gear N MS0 | Throttle / ETV | 1 |
| STP Gear # MS# | Throttle / ETV | 12 |
| STP Gear N MS1 | Throttle / ETV | 1 |
| TPS x O2 compensation | Throttle / ETV | 1 |
| Fan | Temperature | 1 |
| Ram Air Correction Comb # Gear | Gearbox | 5 |
| ECU ID | Other | 1 |
| Ram Air Correction Comb 6 March | Other · Ram Air | 1 |
1 adjustable scalar (rev limits, thresholds, corrections)
1 patch & flag (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSF-650 2007-2013?
This verified definition exposes 73 calibration tables — including fuel, ignition, throttle, gearbox, other · ram air and temperature maps — plus 1 adjustable scalars and 1 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSF-650 definition cover?
The 32920-17H90. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.