Suzuki GSF-650
- ECU
- 32920-17H31
- ECU maker
- —
- Model years
- 2007-2013
- Stock firmware
- Included · 256 KB
What you can tune
77 calibration tables · 0 scalars · 7 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Gear # | Fuel | 6 |
| Cyl # | Fuel | 16 |
| Deceleration Fuel Cut | Fuel | 1 |
| Fuel Limit Soft Cut type | Fuel | 1 |
| RPM Fuel Soft/Hard (Type 1) | Fuel | 1 |
| RPM Fuel Hard (Type 2) | Fuel | 1 |
| RPM Fuel Hard (Type 3) - Neutral | Fuel | 1 |
| Fuel Limit by gear | Fuel | 1 |
| Fuel Limit-by-Gear Soft Cut | Fuel | 1 |
| RPM Fuel Limit-by-Gear Soft Cut | Fuel | 1 |
| RPM Fuel Limit-by-Gear Hard Cut | Fuel | 1 |
| Ignition Map Select | Ignition | 1 |
| Cyl #/# - Neutral | Ignition | 4 |
| Cyl # - Group # | Ignition | 24 |
| RPM Ignition Limits | Ignition | 1 |
| RPM Ignition Limit-by-Gear | Ignition | 1 |
| Gear N | Throttle / ETV | 2 |
| Gear # | Throttle / ETV | 12 |
| Fan temperature | Temperature | 1 |
7 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSF-650 2007-2013?
This verified definition exposes 77 calibration tables — including fuel, ignition, throttle and temperature maps — plus 0 adjustable scalars and 7 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSF-650 definition cover?
The 32920-17H31. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.