Kawasaki ZX-6R
- ECU
- 21175-0221
- ECU maker
- —
- Model years
- 2011-2012
- Stock firmware
- Included · 512 KB
What you can tune
108 calibration tables · 0 scalars · 12 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| RPM vs RAM-Air Comp Gear # | Fuel | 6 |
| Primary Injector % Vol | Fuel | 1 |
| Secondary Injector % Vol | Fuel | 1 |
| Primary Injector | Fuel | 1 |
| Secondary Injector | Fuel | 1 |
| Fuel MAP vs RPM CYL# MS# | Fuel | 8 |
| Fuel TPS vs RPM CYL# MS# | Fuel | 8 |
| Gear N | Fuel | 3 |
| Gear 1-6 | Fuel | 3 |
| Fuel Limiter #1 Gear 1-6 Soft | Fuel | 1 |
| Fuel Limiter #2 Gear N Soft | Fuel | 1 |
| Fuel Limiter ## Gear #-# High | Fuel | 4 |
| Fuel Limiter #4 Gear N High | Fuel | 1 |
| Speed Limit fuel ## | Fuel | 2 |
| IGN Gear N | Ignition | 1 |
| IGN Cyl #/# Ms# | Ignition | 4 |
| Gear N | Ignition | 1 |
| Gear 1-6 | Ignition | 1 |
| Volt-Dwell | Ignition | 1 |
| Rev Limit Ignition Soft Gear Imput | Ignition | 1 |
| Rev Limit Ignition Soft Gear N | Ignition | 1 |
| Rev Limit Ignition High Gear Imput | Ignition | 1 |
| Speed Limit Ignition | Ignition | 1 |
| Gear N | Throttle / ETV | 2 |
| Gear # | Throttle / ETV | 24 |
| Fan Temperature | Temperature | 1 |
| Gear N | Gearbox | 2 |
| Gear # | Gearbox | 24 |
| QS Kill Time by Gear | Gearbox | 1 |
| Min. RPM Cut | Other · Modules QS | 1 |
12 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Kawasaki ZX-6R 2011-2012?
This verified definition exposes 108 calibration tables — including fuel, ignition, throttle, gearbox, other · modules qs and temperature maps — plus 0 adjustable scalars and 12 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Kawasaki ZX-6R definition cover?
The 21175-0221. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.