Kawasaki ZX-6R
- ECU
- 21175-0047
- ECU maker
- —
- Model years
- 2005-2006
- Stock firmware
- Included · 256 KB
What you can tune
246 calibration tables · 1 scalars · 0 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Acceleration Pump 1x9 | Fuel | 1 |
| Injector Timing lower | Fuel | 1 |
| Injector Timing upper | Fuel | 1 |
| Injector Balance lower | Fuel | 1 |
| Injector balance upper | Fuel | 1 |
| IAP Cyl # lower | Fuel | 4 |
| IAP Cyl # upper | Fuel | 4 |
| TPS Cyl # lower | Fuel | 4 |
| TPS Cyl # upper | Fuel | 4 |
| ECT IAP Comp# | Fuel | 2 |
| ECT TPS Comp# | Fuel | 2 |
| Decel fuel cut | Fuel | 1 |
| Fuel Soft by gear? | Fuel | 1 |
| Fuel Hard | Fuel | 1 |
| Fuel Soft (2 not used) | Fuel | 1 |
| Fuel Hard 2 | Fuel | 1 |
| Fuel Soft3 | Fuel | 1 |
| Neutral | Ignition | 1 |
| Cyl #-# | Ignition | 4 |
| ECT Idle Compensation# | Ignition | 2 |
| Ignition Dwell | Ignition | 1 |
| Ignition Hard | Ignition | 1 |
| Ignition Hard 2 | Ignition | 1 |
| Ignition Speed Limit | Ignition | 1 |
| Neutral MS0 | Throttle / ETV | 1 |
| Gear # | Throttle / ETV | 6 |
| Neutral | Throttle / ETV | 1 |
| Gear# | Throttle / ETV | 6 |
| Speed Limiter | Limiters | 1 |
| Speed Limiter 2 | Limiters | 1 |
| Gear # | Gearbox | 12 |
| Neutral MS0 | Gearbox | 1 |
| Neutral | Gearbox | 1 |
| Gear# | Gearbox | 2 |
| IAP vs RPM comp unk 8x12 | Sensors & Axis | 1 |
| #x#A# #x# | Other · 2D | 10 |
| 0x0002A1FA 1x21 | Other · 2D | 1 |
| 0x0002A22C 1x14 | Other · 2D | 1 |
| ECT Volts--> C° 1x29 | Other · 2D | 1 |
| IAT Volts--> °C | Other · 2D | 1 |
131 map groups in total — the full list is in the editor.
1 adjustable scalar (rev limits, thresholds, corrections)
| Info |
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Kawasaki ZX-6R 2005-2006?
This verified definition exposes 246 calibration tables — including fuel, ignition, throttle, limiters, gearbox, other · 2d, other · 3d, other · excva ms1, other · ram air and sensors & axis maps — plus 1 adjustable scalars and 0 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Kawasaki ZX-6R definition cover?
The 21175-0047. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.