Aprilia RS660-Tuono 660
- ECU
- Marelli 11MP
- ECU maker
- Marelli
- Model years
- 2021-2023
- Stock firmware
- Included · 4 MB
What you can tune
28 calibration tables · 0 scalars · 0 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Fuel correction - cylinder # | Fuel | 4 |
| Main Fuel - cylinder # | Fuel | 2 |
| Fuel correction by engine temperature cylinder # | Fuel | 4 |
| Lambda map | Fuel | 1 |
| Fuel correction by intake air temperature | Fuel | 1 |
| Spark advance angle characteristic map cylinder # | Ignition | 2 |
| Spark advance angle correction by engine temperature | Ignition | 1 |
| Spark advance angle correction by air temperature | Ignition | 1 |
| Minimal Spark advance angle | Ignition | 1 |
| Optimal Spark advance angle | Ignition | 1 |
| Torque Mode Challenge | Torque | 2 |
| Torque Mode Dynamic | Torque | 2 |
| Torque Mode Commute | Torque | 2 |
| Idle engine speed | Idle | 1 |
| RPM Limiter # | Limiters | 2 |
| Info | Other | 1 |
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Aprilia RS660-Tuono 660 2021-2023?
This verified definition exposes 28 calibration tables — including fuel, ignition, limiters, idle and torque maps — plus 0 adjustable scalars and 0 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Aprilia RS660-Tuono 660 definition cover?
The Marelli 11MP (Marelli). Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.