Yamaha Y15ZR-Exciter 150
- ECU
- 2PV-H591A-10
- ECU maker
- —
- Model years
- 2019-2022
- Stock firmware
- Upload your own
What you can tune
24 calibration tables · 0 scalars · 0 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| MAP vs RPM | Fuel | 1 |
| TPS vs RPM | Fuel | 1 |
| Y-MAP_RPM | Fuel | 1 |
| X-MAP % | Fuel | 1 |
| Y-TPS_RPM | Fuel | 1 |
| X-TPS % | Fuel | 1 |
| Y-AFR #1 | Fuel | 1 |
| X-AFR #1 | Fuel | 1 |
| AFR Target_# | Fuel | 2 |
| Ignition Timing | Ignition | 1 |
| Y-IGN_RPM | Ignition | 1 |
| X-IGN % | Ignition | 1 |
| RPM Limiter # | Limiters | 2 |
| Y-Air Calculation | Sensors & Axis | 1 |
| X-Air Calculation | Sensors & Axis | 1 |
| Calibration ID ## | Other · ECU Info | 2 |
| Checksum ## | Other · ECU Info | 2 |
| Diagnostic Trouble Code_2PV1 | Other · ECU Setting | 1 |
| Diagnostic Trouble Code_B8D0 | Other · ECU Setting | 1 |
| Air Calculation | Other · Other Maps | 1 |
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha Y15ZR-Exciter 150 2019-2022?
This verified definition exposes 24 calibration tables — including fuel, ignition, limiters, other · ecu info, other · ecu setting, other · other maps and sensors & axis maps — plus 0 adjustable scalars and 0 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha Y15ZR-Exciter 150 definition cover?
The 2PV-H591A-10. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.