Yamaha XT1200Z Super Tenere
- ECU
- 23P-8591A-XX
- ECU maker
- —
- Model years
- 2010-2013
- Stock firmware
- Upload your own
What you can tune
52 calibration tables · 0 scalars · 4 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| RPM Fuel - 50pti | Fuel | 1 |
| TPS Fuel - 50pti | Fuel | 1 |
| MAP Fuel - 50pti | Fuel | 1 |
| MAP Cyl#1 - 50*50 | Fuel | 1 |
| MAP Cyl#2 | Fuel | 1 |
| MAP FT - Cyl#1 - 50*50 | Fuel | 1 |
| MAP FT - Cyl#2 | Fuel | 1 |
| TPS Cyl#1 - 50*50 | Fuel | 1 |
| TPS Cyl#2 | Fuel | 1 |
| TPS FT - Cyl#1 - 50*50 | Fuel | 1 |
| TPS FT - Cyl#2 | Fuel | 1 |
| Delta TPS vs RPM Gear 2,3,4 - 11*11 | Fuel | 1 |
| Delta TPS vs RPM Gear 0,1,5,6 | Fuel | 1 |
| Primary INJ. Adv.-17*10 | Fuel | 1 |
| Decel Fuel Cut Gear/RPM | Fuel | 1 |
| Rev Limit Fuel## | Fuel | 2 |
| RPM Ignition - 36pti | Ignition | 1 |
| TPS Ignition - 23pti | Ignition | 1 |
| Selection Mode T | Ignition | 1 |
| Selection Mode S | Ignition | 1 |
| IGN. Neutral - 36*23 | Ignition | 1 |
| IGN. Map## | Ignition | 19 |
| Volt Dwell - 18*9 | Ignition | 2 |
| Rev Limit Ignition | Ignition | 1 |
| Quick Shift Timing Map GEAR | Ignition | 1 |
| ECT x RPM Idle speed- 10*15 | Idle | 1 |
| Fan Temps | Temperature | 1 |
| QS Minimum RPM | Other · Modules QSS-PIN21 | 1 |
| QS Active Delay | Other · Modules QSS-PIN21 | 1 |
| QS Next Shift Delay | Other · Modules QSS-PIN21 | 1 |
| ECU Software | Other · ROM Info - 7FFFF | 1 |
| Checksum - 7FFF8 | Other · ROM Info - 7FFFF | 1 |
4 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha XT1200Z Super Tenere 2010-2013?
This verified definition exposes 52 calibration tables — including fuel, ignition, idle, other · modules qss-pin21, other · rom info - 7ffff and temperature maps — plus 0 adjustable scalars and 4 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha XT1200Z Super Tenere definition cover?
The 23P-8591A-XX. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.