Yamaha Tracer 700
- ECU
- B34-8591A-10
- ECU maker
- —
- Model years
- 2016-2020
- Stock firmware
- Included · 1 MB
What you can tune
46 calibration tables · 1 scalars · 1 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| RPM Fuel-50pti | Fuel | 1 |
| TPS Fuel-50pti | Fuel | 1 |
| MAP Fuel-50pti | Fuel | 1 |
| MAP Cyl - 1 50x50 | Fuel | 1 |
| MAP Cyl - 2 | Fuel | 1 |
| TPS Cyl - # | Fuel | 2 |
| TPS vs MAP | Fuel | 1 |
| Delta TPS vs RPM Neutral 11x11 | Fuel | 1 |
| Delta TPS vs RPM Gear 1 | Fuel | 1 |
| Delta TPS vs RPM Gear 2,3,4,5,6 | Fuel | 1 |
| Primary INJ. Adv. 17x10 | Fuel | 1 |
| Rev Limit Fuel | Fuel | 1 |
| Rev Limit Fuel 2 | Fuel | 1 |
| Decel Fuel Cut Gear/RPM | Fuel | 1 |
| RPM Ignition-36pti | Ignition | 1 |
| TPS Ignition-23pti | Ignition | 1 |
| IGN-Gear/Map Index-Cyl## | Ignition | 2 |
| IGN. Neutral-Cyl#1 36x23 | Ignition | 1 |
| IGN. Neutral-Cyl#2 | Ignition | 1 |
| IGN. MAP## | Ignition | 18 |
| Volt Dwell## | Ignition | 2 |
| ECT vs. RPM Idle speed | Idle | 1 |
| Fan Temps | Temperature | 1 |
| Quick Shift Timimg Map GEAR | Gearbox | 1 |
| ECU Serial Number | Other | 1 |
| CHECKSUM 0xFFFF8 | Other | 1 |
1 adjustable scalar (rev limits, thresholds, corrections)
| QS Minium RPM |
1 patch & flag (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha Tracer 700 2016-2020?
This verified definition exposes 46 calibration tables — including fuel, ignition, gearbox, idle and temperature maps — plus 1 adjustable scalars and 1 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha Tracer 700 definition cover?
The B34-8591A-10. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.