Yamaha MT-10
- ECU
- B67-8591A-10
- ECU maker
- —
- Model years
- 2016
- Stock firmware
- Included · 1 MB
What you can tune
657 calibration tables · 0 scalars · 5 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Decel Fuel Cut Low | Fuel | 1 |
| Decel Fuel Cut High | Fuel | 1 |
| Cyl # | Fuel | 8 |
| Delta TPS vs RPM - Gear 0 | Fuel | 1 |
| Delta TPS vs RPM - Gear 1,2 | Fuel | 1 |
| Delta TPS vs RPM - Gear 3,4,5,6 | Fuel | 1 |
| Gear Map# - STD | Ignition | 1 |
| Gear Map# - A | Ignition | 1 |
| Gear Map# - B | Ignition | 1 |
| Unk. | Ignition | 1 |
| Neutral | Ignition | 1 |
| Map## | Ignition | 9 |
| Cyl # | Ignition | 3 |
| Volt Dwell | Ignition | 1 |
| Map## | Throttle / ETV | 57 |
| Gear Map# Index | Throttle / ETV | 1 |
| ETC vs RPM Idle Speed | Idle | 1 |
| Fan Temp | Temperature | 1 |
| Rev Limit # | Limiters | 3 |
| #x#D# #x# Bit# | Other · 2D | 38 |
| 0x000A4EBC 1x28 Bit8 | Other · 2D | 1 |
| 0x000A4EF5 1x29 Bit8 | Other · 2D | 1 |
| #x#A#F# #x# Bit# | Other · 2D | 11 |
| 0x000A4F3C 1x4 Bit8 | Other · 2D | 1 |
| 0x000A4FA6 1x8 Bit16 | Other · 2D | 1 |
| 0x000A4FC6 1x8 Bit16 | Other · 2D | 1 |
| 0x000A4FEA 1x20 Bit16 | Other · 2D | 1 |
| #x#A# #x# Bit# | Other · 2D | 12 |
| #x#A#E #x# Bit# | Other · 2D | 3 |
| #x#A#A# #x# Bit# | Other · 2D | 4 |
| #x#A#D# #x# Bit# | Other · 2D | 7 |
| 0x000A50FC 1x13 Bit16 | Other · 2D | 1 |
| #x#A#C #x# Bit# | Other · 2D | 4 |
| #x#A#C# #x# Bit# | Other · 2D | 5 |
| #x#A#E# #x# Bit# | Other · 2D | 6 |
| 0x000A51EE 1x4 Bit16 | Other · 2D | 1 |
| 0x000A572A 1x8 Bit8 | Other · 2D | 1 |
| 0x000A57BC 1x17 Bit8 | Other · 2D | 1 |
| 0x000A5A2C 1x17 Bit8 | Other · 2D | 1 |
| 0x000A5AC8 1x17 Bit8 | Other · 2D | 1 |
277 map groups in total — the full list is in the editor.
5 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Yamaha MT-10 2016?
This verified definition exposes 657 calibration tables — including fuel, ignition, throttle, limiters, idle, other · 2d, other · 3d and temperature maps — plus 0 adjustable scalars and 5 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Yamaha MT-10 definition cover?
The B67-8591A-10. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.