Triumph Scrambler 900
- ECU
- Keihin
- ECU maker
- Keihin
- Model years
- 2015-2016
- Stock firmware
- Upload your own
What you can tune
16 calibration tables · 5 scalars · 1 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Air Fuel Ratio | Fuel | 1 |
| Fuel Table for small throttle opening cylinder # | Fuel | 2 |
| Main Fuel Table cylinder # | Fuel | 2 |
| Ignition advance-angle characterist map - gear # | Ignition | 4 |
| Ignition advance-angle characterist map - gear 2-4 | Ignition | 2 |
| Ignition advance-angle characterist map - Neutral | Ignition | 2 |
| RPM Limiter # | Limiters | 2 |
| Info | Other | 1 |
5 adjustable scalars (rev limits, thresholds, corrections)
| Idle engine speed by temperature -13°C |
| Idle engine speed by temperature 20°C |
| Idle engine speed by temperature 35°C |
| Idle engine speed by temperature 57°C |
| Idle engine speed by temperature 74°C |
1 patch & flag (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Triumph Scrambler 900 2015-2016?
This verified definition exposes 16 calibration tables — including fuel, ignition and limiters maps — plus 5 adjustable scalars and 1 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Triumph Scrambler 900 definition cover?
The Keihin (Keihin). Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.