Suzuki Intruder C109R
- ECU
- 32920-22H01
- ECU maker
- —
- Model years
- 2008-2010
- Stock firmware
- Included · 384 KB
What you can tune
50 calibration tables · 0 scalars · 4 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Fuel Decel Cut | Fuel | 1 |
| Cylinder # - Neutral | Ignition | 8 |
| Cylinder # - Gear Group # | Ignition | 16 |
| Fan Temp | Ignition | 1 |
| Ign. Map Index # | Ignition | 1 |
| Cylinder # | Throttle / ETV | 8 |
| Neutral | Throttle / ETV | 1 |
| Gear # | Throttle / ETV | 5 |
| Gear 5 - Restriction | Throttle / ETV | 1 |
| Cylinder # | Other · Speed Density (IAP) MS0 Set 1 | 2 |
| Cylinder # | Other · Speed Density (IAP) MS0 Set 2 | 2 |
| Cylinder # | Other · Speed Density (IAP) MS1 Set 1 | 2 |
| Cylinder # | Other · Speed Density (IAP) MS1 Set 2 | 2 |
4 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki Intruder C109R 2008-2010?
This verified definition exposes 50 calibration tables — including fuel, ignition, throttle, other · speed density (iap) ms0 set 1, other · speed density (iap) ms0 set 2, other · speed density (iap) ms1 set 1 and other · speed density (iap) ms1 set 2 maps — plus 0 adjustable scalars and 4 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki Intruder C109R definition cover?
The 32920-22H01. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.