Suzuki GSXS-750
- ECU
- 32920-13K40
- ECU maker
- —
- Model years
- 2017-2022
- Stock firmware
- Included · 1 MB
What you can tune
96 calibration tables · 7 scalars · 0 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Comb MAP Cyl # Neutral | Fuel | 4 |
| Comb MAP Cyl # Gear | Fuel | 4 |
| Select Ignition x Gear Group | Ignition | 1 |
| Ign Cyl # Neutral | Ignition | 4 |
| Ign Cyl # Gear # - # | Ignition | 36 |
| Comb TPS Cyl # Neutral | Throttle / ETV | 4 |
| Comb TPS Cyl # Gear # - # | Throttle / ETV | 4 |
| Neutral STP | Throttle / ETV | 1 |
| STP #M | Throttle / ETV | 6 |
| STP Neutral 1 Off Mode | Throttle / ETV | 1 |
| STP #M Off Mode | Throttle / ETV | 6 |
| STP Deccel N, 1, 2, 5 and 6M | Throttle / ETV | 1 |
| STP Deccel #M | Throttle / ETV | 2 |
| EXCVA Neutral | Air & Exhaust | 1 |
| EXCVA #M | Air & Exhaust | 6 |
| EXCVA Deccel N, 1, 2, 5 and 6M | Air & Exhaust | 1 |
| EXCVA Deccel #M | Air & Exhaust | 2 |
| Fan Trigger - Fan | Temperature | 1 |
| Start and End Comb Limiter | Limiters | 1 |
| Final Comb Limiter | Limiters | 1 |
| Neutral Comb Limiter or Clutch On | Limiters | 1 |
| Ram Air Comp Gear # | Gearbox | 6 |
| Denso ID | Other | 1 |
| ECU Number | Other | 1 |
7 adjustable scalars (rev limits, thresholds, corrections)
| Info |
| Enable Speed Limiter 1 |
| Enable Speed Limiter 2 |
| EXCVA Disable phase 1 - drag to 00* |
| EXCVA Disable phase 2 - drag to 01* |
| EXCVA Disable phase 3 - drag to 01* |
| EXCVA Disable phase 4 - drag to 01* |
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSXS-750 2017-2022?
This verified definition exposes 96 calibration tables — including fuel, ignition, throttle, air & exhaust, limiters, gearbox and temperature maps — plus 7 adjustable scalars and 0 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSXS-750 definition cover?
The 32920-13K40. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.