Suzuki GSXS-1000
- ECU
- 32920-04K81
- ECU maker
- —
- Model years
- 2015-2016
- Stock firmware
- Included · 512 KB
What you can tune
72 calibration tables · 0 scalars · 6 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Cyl - # | Fuel | 16 |
| Gear N | Fuel | 1 |
| Gear # | Fuel | 6 |
| Decel Fuel Cut-Off | Fuel | 1 |
| Cyl - # | Ignition | 28 |
| Gear N | Throttle / ETV | 1 |
| Gear # | Throttle / ETV | 6 |
| Gear N | Air & Exhaust | 1 |
| Gear #-# | Air & Exhaust | 2 |
| Fan Temperature Control | Temperature | 1 |
| Rev Limiter_Soft/Hard | Limiters | 1 |
| Rev Limiter_Lo/Hi | Limiters | 1 |
| Rev Limiter_Soft/Hard_2 | Limiters | 1 |
| Rev Limiter_Neutral | Limiters | 1 |
| Rev Limiter_Gear | Limiters | 1 |
| Password | Other · General ECU Info | 1 |
| Hardware Nr. | Other · General ECU Info | 1 |
| Software Nr. | Other · General ECU Info | 1 |
| Software Upgrade Nr. | Other · General ECU Info | 1 |
6 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSXS-1000 2015-2016?
This verified definition exposes 72 calibration tables — including fuel, ignition, throttle, air & exhaust, limiters, other · general ecu info and temperature maps — plus 0 adjustable scalars and 6 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSXS-1000 definition cover?
The 32920-04K81. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.