Suzuki GSXR-1000R
- ECU
- 32920-17KA3
- ECU maker
- —
- Model years
- 2017-2022
- Stock firmware
- Included · 1.5 MB
What you can tune
110 calibration tables · 0 scalars · 11 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Primary INJ. % | Fuel | 1 |
| Cyl # | Fuel | 16 |
| gearN | Fuel | 4 |
| gear# | Fuel | 24 |
| Deceleration Fuel Cut | Fuel | 1 |
| Ram Air by Gear | Fuel | 1 |
| Cyl # - Cyl # | Ignition | 2 |
| Cyl # | Ignition | 24 |
| Volt vs RPM | Ignition | 1 |
| Select Group | Ignition | 1 |
| Gear N | Air & Exhaust | 4 |
| Gear # | Air & Exhaust | 24 |
| Fan Temp | Temperature | 1 |
| RPM Limiter 1 | Limiters | 1 |
| RPM Limit 2 | Limiters | 1 |
| Hardware | Other · ROM Info | 1 |
| Serial Number | Other · ROM Info | 1 |
| Speed x SD% | Other · ECU Settings Steering Damper | 1 |
| Password Hex | Other · ROM Info ECU Password | 1 |
11 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Suzuki GSXR-1000R 2017-2022?
This verified definition exposes 110 calibration tables — including fuel, ignition, air & exhaust, limiters, other · ecu settings steering damper, other · rom info, other · rom info ecu password and temperature maps — plus 0 adjustable scalars and 11 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Suzuki GSXR-1000R definition cover?
The 32920-17KA3. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.