Kawasaki ZX-14
- ECU
- 21175-0154
- ECU maker
- —
- Model years
- 2008-2011
- Stock firmware
- Included · 256 KB
What you can tune
56 calibration tables · 0 scalars · 2 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| MAP - MS# - Cyl## - #*# | Fuel | 2 |
| MAP - MS# - Cyl## | Fuel | 6 |
| TPS - MS# - Cyl## - #*# | Fuel | 2 |
| TPS - MS# - Cyl## | Fuel | 6 |
| Fuel Trim - Gear#1 - 32*20 | Fuel | 1 |
| Fuel Trim - Gear## | Fuel | 5 |
| Fuel RPM Limit Soft Cut | Fuel | 1 |
| Fuel RPM Limit Hard Cut | Fuel | 1 |
| Fuel RPM Limit Soft Cut Neutral | Fuel | 1 |
| Fuel RPM Limit Hard Cut Neutral | Fuel | 1 |
| Fuel Speed Limit Soft Cut | Fuel | 1 |
| Fuel Speed Limit Hard Cut | Fuel | 1 |
| IGN - MS# - Gear#-# - Cyl## - #*# | Ignition | 2 |
| IGN - MS# - Gear#-# - Cyl## | Ignition | 6 |
| TPS# | Throttle / ETV | 2 |
| STP - MS# - Neutral - #*# | Throttle / ETV | 2 |
| STP - MS# - Gear## | Throttle / ETV | 4 |
| STP - MS# - Gear##-# | Throttle / ETV | 4 |
| Fan Temps | Temperature | 1 |
| Rev Limit | Limiters | 1 |
| RPM# | Sensors & Axis | 3 |
| MAP18 | Sensors & Axis | 1 |
| ECU Hardware | Other · ROM Info - 3FFFF | 1 |
| ECU Software | Other · ROM Info - 3FFFF | 1 |
2 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Kawasaki ZX-14 2008-2011?
This verified definition exposes 56 calibration tables — including fuel, ignition, throttle, limiters, other · rom info - 3ffff, sensors & axis and temperature maps — plus 0 adjustable scalars and 2 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Kawasaki ZX-14 definition cover?
The 21175-0154. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.