Kawasaki ZX-10R
- ECU
- 21175-0158
- ECU maker
- —
- Model years
- 2008-2010
- Stock firmware
- Included · 512 KB
What you can tune
104 calibration tables · 0 scalars · 4 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Cyl # MS# | Fuel | 24 |
| Cyll # MS# | Fuel | 8 |
| Upper Injector % MS# | Fuel | 2 |
| Lower Injector% MS0 | Fuel | 1 |
| Lower Injector % MS1 | Fuel | 1 |
| Cyl # MS# | Ignition | 8 |
| TPS-# | Throttle / ETV | 2 |
| Neutral MS# | Throttle / ETV | 2 |
| Gear # MS# | Throttle / ETV | 8 |
| Gear # & # MS# | Throttle / ETV | 2 |
| Fan Temp | Temperature | 1 |
| Limiters RPM Group # | Limiters | 4 |
| Top Speed Limit Inicial | Limiters | 1 |
| Top Speed Limit Final | Limiters | 1 |
| RPM-# | Sensors & Axis | 3 |
| MAP-18 | Sensors & Axis | 1 |
| #-# | Sensors & Axis | 32 |
| Serial Number | Other · Setup | 1 |
| ID Mitsubishi | Other · Setup | 1 |
| Limitesr RPM Group 3 | Other · Setup | 1 |
4 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Kawasaki ZX-10R 2008-2010?
This verified definition exposes 104 calibration tables — including fuel, ignition, throttle, limiters, other · setup, sensors & axis and temperature maps — plus 0 adjustable scalars and 4 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Kawasaki ZX-10R definition cover?
The 21175-0158. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.