Kawasaki ZX-10R
- ECU
- 21175-0094
- ECU maker
- —
- Model years
- 2006-2007
- Stock firmware
- Included · 256 KB
What you can tune
54 calibration tables · 0 scalars · 1 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| IAP Cyl# MS# | Fuel | 8 |
| TPS Cyl# MS# | Fuel | 8 |
| Fuel Trim Gear# | Fuel | 6 |
| General IAP Trim | Fuel | 1 |
| General TPS Trim | Fuel | 1 |
| Limiter ## | Fuel | 2 |
| Injector Voltage Compensation | Fuel | 1 |
| Cyl# | Ignition | 8 |
| Neutral (beta testing) | Ignition | 1 |
| Limiter #1 | Ignition | 1 |
| Ignition Coil compensation | Ignition | 1 |
| STP Neutral MS# | Throttle / ETV | 2 |
| STP Gear #-# MS# | Throttle / ETV | 6 |
| Exhaust Valve MS# | Air & Exhaust | 2 |
| Fan | Temperature | 1 |
| Speed Limiter ## | Limiters | 2 |
| Part Number | Other · Rom Info | 1 |
| Sw Version | Other · Rom Info | 1 |
| Hw Version | Other · Rom Info | 1 |
1 patch & flag (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Kawasaki ZX-10R 2006-2007?
This verified definition exposes 54 calibration tables — including fuel, ignition, throttle, air & exhaust, limiters, other · rom info and temperature maps — plus 0 adjustable scalars and 1 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Kawasaki ZX-10R definition cover?
The 21175-0094. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.