Kawasaki Versys-650
- ECU
- 21175-1210
- ECU maker
- —
- Model years
- 2017-2020
- Stock firmware
- Upload your own
What you can tune
69 calibration tables · 1 scalars · 0 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| MAP : Gear Neutral : Cyl # | Fuel | 2 |
| MAP : Gear #-# : Cyl # | Fuel | 4 |
| TPS : Gear Neutral : Cyl # | Fuel | 2 |
| TPS : Gear #-# : Cyl # | Fuel | 4 |
| Primary Injector Advance | Fuel | 1 |
| Injector Balance Map Gear # | Fuel | 6 |
| Fuel :: Rev Limiter # | Fuel | 6 |
| Ignition Dwell Normal operation | Ignition | 1 |
| Ignition : Gear Neutral | Ignition | 1 |
| Ignition : Gear #-# Cyl # | Ignition | 4 |
| Ignition :: Rev Limiter # | Ignition | 2 |
| Compensation TPS Gear Neutral Cyl # | Throttle / ETV | 2 |
| Compensation TPS Gear #-# Cyl # | Throttle / ETV | 2 |
| STP Gear N Cyl # | Throttle / ETV | 2 |
| STP Gear # Cyl # | Throttle / ETV | 24 |
| Gear # | Gearbox | 6 |
1 adjustable scalar (rev limits, thresholds, corrections)
| Info |
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Kawasaki Versys-650 2017-2020?
This verified definition exposes 69 calibration tables — including fuel, ignition, throttle and gearbox maps — plus 1 adjustable scalars and 0 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Kawasaki Versys-650 definition cover?
The 21175-1210. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.