Honda XL750 Transalp
- ECU
- 38770-MLC-D01
- ECU maker
- —
- Model years
- 2023-2024
- Stock firmware
- Included · 2 MB
What you can tune
144 calibration tables · 0 scalars · 5 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| IAP :: MS# :: Cyl # | Fuel | 4 |
| TPS :: MS# :: Cyl # | Fuel | 4 |
| Fuel Trim by Gear :: Cylinder # | Fuel | 2 |
| Maximum Fuel Limit | Fuel | 1 |
| Ignition Advance :: MS# :: Cyl # :: Neutral/Clutch | Ignition | 4 |
| Ignition Advance :: MS# :: Cyl # :: Group # | Ignition | 16 |
| ETV Limiter ## | Throttle / ETV | 2 |
| ETV :: Mode # :: Neutral/Clutch | Throttle / ETV | 4 |
| ETV :: Mode # :: Gear # | Throttle / ETV | 30 |
| ETV :: Mode # :: Gear #a | Throttle / ETV | 30 |
| ETV :: Mode # :: Gear #b | Throttle / ETV | 30 |
| Torque Maps :: MS# :: Gear # | Torque | 12 |
| Idle Speed :: MS# | Idle | 2 |
| Fan Temps | Temperature | 1 |
| RPM Limiter | Limiters | 1 |
| ECU Id | Other | 1 |
5 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Honda XL750 Transalp 2023-2024?
This verified definition exposes 144 calibration tables — including fuel, ignition, throttle, limiters, idle, temperature and torque maps — plus 0 adjustable scalars and 5 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Honda XL750 Transalp definition cover?
The 38770-MLC-D01. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.