Honda CBR600RR
- ECU
- 38770-MFJ-D03
- ECU maker
- —
- Model years
- 2009-2012
- Stock firmware
- Upload your own
What you can tune
64 calibration tables · 0 scalars · 18 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| CYL# | Fuel | 16 |
| Exvl RPM Moving | Fuel | 2 |
| Upper Injector Balance | Fuel | 2 |
| Idle Rpm Neutral-# | Fuel | 3 |
| Idle Rpm in Gear-# | Fuel | 2 |
| CYL# - GEAR #-# | Ignition | 24 |
| CYL1-4 - Gear N / Cluch IN | Ignition | 2 |
| Fan Moving ECT Sensor Voltage | Temperature | 1 |
| Fan Moving ECT Sensor Voltage2 | Temperature | 1 |
| ECT Sensor Scaling | Temperature | 1 |
| Rev. Limits # | Limiters | 2 |
| Rev. Limits #.# | Limiters | 4 |
| ECU Map ID | Other · Ecu serial Number | 1 |
| Steering Damper %sd | Other · Hesd MS0 | 1 |
| Steering Damper %sd | Other · Hesd MS1 | 1 |
| password | Other · Ecu Settings | 1 |
18 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Honda CBR600RR 2009-2012?
This verified definition exposes 64 calibration tables — including fuel, ignition, limiters, other · ecu settings, other · ecu serial number, other · hesd ms0, other · hesd ms1 and temperature maps — plus 0 adjustable scalars and 18 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Honda CBR600RR definition cover?
The 38770-MFJ-D03. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.