Honda CBR600RR
- ECU
- 38770-MEE-6XX
- ECU maker
- —
- Model years
- 2003-2004
- Stock firmware
- Upload your own
What you can tune
56 calibration tables · 0 scalars · 9 patches & flags — all editable in the browser.
Getting started
Upload your own BIN read of this ECU to start from.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| MS##Breakpoint Fuel RPM-#pti | Fuel | 2 |
| MS##Breakpoint Fuel TPS-#pti | Fuel | 2 |
| MS##Breakpoint Fuel MAP-#pti | Fuel | 2 |
| TPS Cyl# 1 MS0 35x25 | Fuel | 1 |
| TPS Cyl# # MS# | Fuel | 7 |
| MAP Cyl# 1 MS0 35x25 | Fuel | 1 |
| MAP Cyl# # MS# | Fuel | 7 |
| INJ. MS0 35x25 | Fuel | 1 |
| INJ. MS1 | Fuel | 1 |
| Fuel ignition RPM#MS# | Fuel | 2 |
| Decel Fuel Cut## | Fuel | 2 |
| Cyl# #,#,#,# MS# #x# | Ignition | 2 |
| G# - Cyl# # MS# #x# | Ignition | 2 |
| G# - Cyl# # MS# | Ignition | 14 |
| Idle RPM Neutral | Idle | 1 |
| Idle RPM Gear | Idle | 1 |
| Fan Moving ECT Sensor Voltage | Temperature | 1 |
| ECT Sensor Scaling | Temperature | 1 |
| Rev Limit ##MS# | Limiters | 4 |
| CHECKSUM 0x3FFE0 | Other | 1 |
| ECU ID | Other | 1 |
9 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Honda CBR600RR 2003-2004?
This verified definition exposes 56 calibration tables — including fuel, ignition, limiters, idle and temperature maps — plus 0 adjustable scalars and 9 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Honda CBR600RR definition cover?
The 38770-MEE-6XX. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.