Honda CBR1000RR
- ECU
- 38770-MGP-N52
- ECU maker
- —
- Model years
- 2014-2016
- Stock firmware
- Included · 256 KB
What you can tune
43 calibration tables · 0 scalars · 12 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| CYL# | Fuel | 8 |
| Flap RPM Moving | Fuel | 1 |
| Exvl RPM Moving | Fuel | 1 |
| Upper Injector Balance | Fuel | 1 |
| Idle RPM Neutral-# | Fuel | 2 |
| Idle RPM In Gear-# | Fuel | 2 |
| CYL# | Ignition | 12 |
| Ignition Gear N | Ignition | 1 |
| Ignition Limit Off Set | Ignition | 1 |
| Fan Moving Voltage | Temperature | 1 |
| ECT Sensor Scaling | Temperature | 1 |
| Rev. Limits # | Limiters | 6 |
| Speed Limit | Limiters | 1 |
| Active RPM Min. | Quickshifter | 1 |
| Cut Time | Quickshifter | 1 |
| Active Delay | Quickshifter | 1 |
| Next Shift Delay | Quickshifter | 1 |
| Steering Damper % sd | Other · Steering Damper | 1 |
12 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Honda CBR1000RR 2014-2016?
This verified definition exposes 43 calibration tables — including fuel, ignition, limiters, quickshifter, other · steering damper and temperature maps — plus 0 adjustable scalars and 12 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Honda CBR1000RR definition cover?
The 38770-MGP-N52. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.