Honda CBR1000RR
- ECU
- 38770-MFL-631
- ECU maker
- —
- Model years
- 2008
- Stock firmware
- Included · 256 KB
What you can tune
68 calibration tables · 0 scalars · 16 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Injector Pulsewidth MAP, Cyl#, MS# | Fuel | 8 |
| Injector Pulsewidth TPS, Cyl#, MS# | Fuel | 8 |
| Sec. Inj. Balance MS# | Fuel | 2 |
| HESD Rows, MS# | Ignition | 2 |
| HESD Cols, MS# | Ignition | 2 |
| Ignition Timing, Cyl#, Gear #-#, MS# | Ignition | 24 |
| Ignition Timing, Neutral, MS# | Ignition | 2 |
| Ignition Timing, TPS Fail, MS# | Ignition | 2 |
| Target RPM Gear MS# | Ignition | 2 |
| Target RPM Neutral MS# | Ignition | 2 |
| TPS Breakpoints, MS# | Throttle / ETV | 2 |
| Fan Temps MS# | Temperature | 2 |
| Top Speed Limiter MS# | Limiters | 2 |
| RPM Limiter MS# | Limiters | 2 |
| MAP Breakpoints, MS# | Sensors & Axis | 2 |
| RPM Breakpoints, MS# | Sensors & Axis | 2 |
| SD_%_MS# | Other · Outputs HESD | 2 |
16 patches & flags (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Honda CBR1000RR 2008?
This verified definition exposes 68 calibration tables — including fuel, ignition, throttle, limiters, other · outputs hesd, sensors & axis and temperature maps — plus 0 adjustable scalars and 16 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Honda CBR1000RR definition cover?
The 38770-MFL-631. Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.