Gas Gas EC-MC 300 2T
- ECU
- Continental M3C
- ECU maker
- Continental
- Model years
- 2021-2023
- Stock firmware
- Included · 256 KB
What you can tune
55 calibration tables · 0 scalars · 1 patches & flags — all editable in the browser.
Getting started
Start from the included stock firmware, or upload your own BIN read.
Heat-mapped tables, editable 2D/3D graphs, cell math, AI auto-tune, and compare against other reads.
Download a standard modified BIN and flash it with your own hardware and software.
Calibration maps
| Map | Group | Tables |
|---|---|---|
| Main Fuel Table by RPM and Pressure # | Fuel | 8 |
| Main Fuel Table by RPM and Throttle # | Fuel | 6 |
| Ignition advance-angle characteristic map # | Ignition | 8 |
| Ride by Wire - Street - Neutral | Throttle / ETV | 1 |
| Ride by Wire - Street - gear #-# | Throttle / ETV | 3 |
| Ride by Wire - Supermoto - Neutral | Throttle / ETV | 1 |
| Ride by Wire - Supermoto - gear #-# | Throttle / ETV | 3 |
| Ride by Wire - Not used - Neutral | Throttle / ETV | 2 |
| Ride by Wire - Not used - gear #-# | Throttle / ETV | 6 |
| Optimum Torque # | Torque | 5 |
| Exhaust Valve - Neutral | Air & Exhaust | 1 |
| Exhaust Valve - gear # | Air & Exhaust | 6 |
| RPM Limiter # | Limiters | 3 |
| Speed Limiter | Limiters | 1 |
| Info | Other | 1 |
1 patch & flag (toggle features on/off)
MotoEditor edits the calibration and exports a standard BIN — reading and flashing the ECU is handled by your own flashing hardware and software.
Frequently asked
What can I tune on the Gas Gas EC-MC 300 2T 2021-2023?
This verified definition exposes 55 calibration tables — including fuel, ignition, throttle, air & exhaust, limiters and torque maps — plus 0 adjustable scalars and 1 feature patches, all editable in your browser.
Do I need to remove or open the ECU?
No. MotoEditor edits the calibration and exports a standard BIN. Reading the stock file from the bike and writing it back is done with your own flashing hardware and software.
Which ECU does this Gas Gas EC-MC 300 2T definition cover?
The Continental M3C (Continental). Every map address and scaling is verified against the stock firmware, so what you edit matches the real calibration.
Can I use my own stock file?
Yes. Start a project from your bike's stock BIN and your changes apply to it, or begin from the built-in reference — either way you export a standard BIN.
How much does access cost?
MotoEditor is a single subscription that unlocks the browser editor for this definition and every other bike in the library — no per-project or per-download fees.